Efeito dos diferentes tipos de polimento sobre a rugosidade de superfície de uma resina acrílica comercial quimicamente ativada: estudo in vitro / Effect of different types of polishing on the surface roughness of a chemically activated commercial acrylic resin: an in vitro study

Objetivo: avaliar in vitro o polimento sobre resina acrílica quimicamente ativada (RAQA), por meio da rugosidade de superfície (Ra). Materiais e Método: Foram confeccionadas 40 amostras de RAQA, com dimensões de 10 a 10 x 2 mm, e foram divididas em quatro grupos (n=10): ausência do acabamento (AA); Ausência de polimento (AP); Polimento químico (PQ); Polimento com borrachas siliconadas + Escovas (PM). Os espécimes foram avaliados no quanto a rugosidade média (Ra) antes e após o envelhecimento em água destilada em uma estufa por 60 dias. Três medições de Ra (µm), na horizontal foram realizadas e calculada uma média para cada espécime. Os dados foram analisados de forma descritiva e inferencial, ANOVA de medidas repetidas e teste de Tukey com nível de significância de 5%. Resultados: Inicialmente, o grupo AA teve os menores valores de Ra e o grupo AP os maiores valores de rugosidade, com média e desvio padrão respectivamente 0,17 (±0,11) e 0,52 (±0,10). Após o envelhecimento, o grupo AA teve as menores médias e o grupo PQ os maiores valores de Ra, sendo 0,38 (±0,20) e 1,33 (±0,32), respectivamente. Os resultados evidenciaram diferença estatística significante quando as amostras foram submetidas ao acabamento com brocas. Conclusão: A RAQA necessita de polimento após acabamento com brocas, uma vez que a ausência de polimento comprometerá a lisura de superfície do material.(AU)

Objective: to evaluate in vitro polishing on chemically activated acrylic resin (RAQA), using surface roughness (Ra). Materials and Method: 40 RAQA samples were made, measuring 10 to 10 x 2 mm, and divided into four groups (n=10): absence of finishing (AA); Lack of polishing (AP); Chemical polishing (PQ); Polishing with silicone rubbers + Brushes (PM). The specimens were evaluated for their average roughness (Ra) before and after aging in distilled water in an oven for 60 days. Three horizontal Ra (µm) measurements were taken and an average was calculated for each specimen. Data were analyzed descriptively and inferentially, using repeated measures ANOVA and Tukey test with a significance level of 5%. Results: Initially, the AA group had the lowest Ra values and the AP group the highest roughness values, with mean and standard deviation respectively 0.17 (±0.11) and 0.52 (±0.10). After aging, the AA group had the lowest averages and the PQ group the highest Ra values, being 0.38 (±0.20) and 1.33 (±0.32), respectively. The results showed a statistically significant difference when the samples were finished with drills. Conclusion: RAQA requires polishing after finishing with drills, as the lack of polishing will compromise the surface smoothness of the material.(AU)

In vitro comparison of marginal infiltration between a conventional resin and a bulk-fill resin, in the relocation of cervical margins technique / Comparación in vitro de la infiltración marginal entre una resina convencional y una resina bulk-fill, en la técnica de reubicación de márgenes cervicales

Introduction: Proximal lesions that exceed the cement enamel limit (ACE) under the gingival margin complicate impressions and the adhesive technique. Compare the magnitude of micro infiltration between conventional resin and bulk fill resin in the cervical margin relocation technique. Materials and Methods: 48 samples of human teeth re-ceived two preparations: occluso-mesial (OM) and occluso-distal (OD) under LAC; first they received the cervical margin relocation technique (RMC) with bulk fill and conventional resin; then restored with semi-direct resinous inlays. Sample analysis: immersion in 50% colloidal silver nitrate solution, 24 hours, 37°C and cut mesiodistally. Observed under a stereoscopic magnifying glass to assess dye penetration and digitally photographed, analyzed with "Image J" software. Results: Sample of 96 cavities in two groups of 48 units; control group restored with conventional resin with incremental technique and study group restored with bulk fill resin, mono-incremental technique. Probabilistic sampling. No statistically significant diffe-rences in percentage of microinfiltrated area between Filtek™ Z250™ and Filtek™ Bulk Fill™ (p-value= 0.68). Discussion: Various studies show that the presence of marginal microinfiltration exist independent of: restorative technique, consistency, adhesive mechanism and polyme-rization technique. The research carried out is no exception, observing a similar degree for both systems. Conclusions: Results allow us to conclude that conventi-onal resin and bulk fill resin did not show significant differences in microleakage percentages for the RMC technique. Outside the study framework, bulk fill resins would have comparative advantages; better behavior against light in depths greater than 2 mm, less sensitivity to the "C" factor, and less clinical time.

Introducción: Las lesiones proximales que superan el límite cemento esmalte (ACE) por debajo del margen gingival complican las impresiones y la técnica adhesiva. Comparar la magnitud de la microinfiltración entre la resina convencional y la resina de relleno en la técnica de reubicación del margen cervical. Materiales y Métodos: 48 muestras de dientes humanos recibieron dos preparaciones: ocluso-mesial (OM) y ocluso-distal (OD) bajo LAC, primero recibieron la técnica de reubicación del margen cervical (RMC) con relleno en bloque y resina convencional; luego restaurado con incrustaciones resinosas semidirectas. Análisis de la muestra: inmersión en solución de nitrato de plata coloidal al 50%, 24 horas, 37°C y corte mesiodistal. Observado bajo una lupa estereoscópica para evaluar la penetración del tinte y fotografiado digitalmente, analizado con el software "Image J". Resultados: Muestra de 96 cavidades en dos grupos de 48 unidades; grupo control restaurado con resina convencional con técnica incremental y grupo estudio restaurado con resina bulk fill, técnica mono-incremental. Muestreo probabilístico. No hubo diferencias estadísticamente significativas en el porcentaje de área microinfiltrada entre Filtek™ Z250™ y Filtek™ Bulk Fill™ (p-value = 0,68) Discusión: Diversos estudios evidencian presencia de microinfiltración marginal, independiente de técnica restauradora, consistencia, mecanismo adhesivo y técnica polimerizadora. La investigación realizada no es excepción, observándose grado similar para ambos sistemas. Conclusiones: Los resultados permiten concluir que resina convencional y resina bulk fill no presentaron diferencias significativas en porcentajes de microinfiltración para técnica RMC. Fuera del marco del estudio, resinas bulk fill tendrían ventajas comparativas; mejor comportamiento frente a la luz en profundidades superiores a 2 mm, menor sensibilidad al factor "C", y menor tiempo clínico.

Estabilidade de cor de diferentes sistemas cerâmicos fresados no CAD/CAM e polidos com diferentes métodos / Color stability of different ceramic systems milled in CAD/CAM and polished with different methods

A descoloração ou perda de translucidez dos materiais cerâmicos usados em odontologia ainda hoje é um problema, especialmente pelo comprometimento estético. Com o objetivo de comparar a estabilidade de cor, blocos de dissilicato de lítio (IPS e.max CAD HT) e de silicato de lítio reforçado com zircônia (Vita Suprinity HT) fresados no desenho de um disco com dimensões de 1,5 × 7 × 12 mm3 (n = 120) foram preparados usando 3 procedimentos de acabamento de superfície: glaze, polimento mecânico e coloração externa e glaze. Em seguida, cada grupo foi dividido em 2 subgrupos de armazenamento, chá preto e café (n = 10/grupo). As mensurações de cor foram medidas com espectrofotômetro (VITA Easyshade) no estágio inicial e após 1 semana, 2 semanas, 1 mês, 2 meses de armazenamento. As alterações de cor (ΔE) foram calculadas e analisadas estatisticamente usando ANOVA (α < 0,05). Observamos que, para ambos os materiais cerâmicos, o procedimento de glaze apresentou valores de mudança de cor estatisticamente menores do que os outros grupos (p < 0,05) após o armazenamento em ambas as bebidas. Os grupos de dissilicato de lítio apresentaram valores de alteração de cor estatisticamente menores em relação aos grupos de silicato de lítio reforçados com zircônia. Conclui-se que, o glaze sozinho levou a uma maior estabilidade de cor em relação ao polimento mecânico e coloração externa o dissilicato de lítio apresentou maior estabilidade de cor em comparação com o silicato de lítio reforçada com zircônia.

The discoloration or loss of translucency of ceramic materials used in dentistry is still a problem today, especially due to aesthetic compromise. In order to compare color stability, lithium disilicate (IPS e.max CAD HT) and zirconia-reinforced lithium silicate (Vita Suprinity HT) blocks were milled into a disc design with dimensions of 1.5 × 7 × 12 mm3 (n = 120). The specimens were prepared using 3 surface finishing procedures: glaze, mechanical polishing and external staining and glaze. Then, each group was divided into 2 storage subgroups, black tea and coffee (n = 10/group). Color measurements were measured with a spectrophotometer (VITA Easyshade) at the initial stage and after 1 week, 2 weeks, 1 month, 2 months of storage. Color changes (ΔE) were calculated and statistically analyzed using ANOVA (α < 0.05). We observed that, for both ceramic materials, the glaze procedure presented statistically lower color change values ​​than the other groups (p < 0.05) after storage in both beverages. The lithium disilicate groups showed statistically lower color change values ​​than the zirconia-reinforced lithium silicate groups. It is concluded that, glaze alone led to greater color stability compared to mechanical polishing and external staining, lithium disilicate showed greater color stability compared to zirconia-reinforced lithium silicate.

Comportamiento cromático de resinas acrílicas y bisacrílicas para restauraciones provisionales / Chromatic behavior of acrylic and bisacrylic resins used for provisional restorations

Introducción: Las prótesis provisionales son restauraciones usadas en prótesis fijas durante un tiempo, hasta la cementación de la prótesis definitiva. Uno de los problemas que presentan este tipo de restauraciones es el cambio de color, que afecta a la estética y, en consecuencia, produce sensación de desagrado en los pacientes. Objetivo: Evaluar, para restauraciones provisionales, con y sin el pulido final de la superficie, la estabilidad del color de dos resinas al ser sumergidas en café. Métodos: Estudio experimental in vitro, realizado en el Laboratorio de Prótesis de la Facultad de Odontología de la Universidad Nacional del Nordeste, Corrientes-Argentina, 2019. Se comparó una resina acrílica (Duralay®) con una bisacrílica (ProtempIV 3M®) para restauraciones provisionales. Se elaboraron 40 discos de resinas a partir de moldes metálicos de 25 mm de diámetro y 2 mm de espesor. Se utilizaron 20 discos para cada tipo de resina, de ellos, 10 pulidos y 10 sin pulir. Las muestras fueron almacenadas en agua destilada en estufa a 37 °C durante 24 h para hidratarlos. Luego se procedió a la toma del color. Con posterioridad, cada grupo se sumergió en café, manteniéndolos en estufa a 37 °C durante 24 h más. Seguidamente, se realizó la segunda toma del color. Se utilizó el colorímetro Kónica Minolta®, determinando la diferencia total de color ΔE. Para el análisis estadístico se utilizó ANOVA una vía y test de Tukey para identificar la diferencia entre grupos. Resultados: Se observó en el grupo de resina acrílica pulida una diferencia ΔE = 0,82 ± DS = 0,22 y de ΔE = 3,86 ± DS = 0,30 sin pulido. En el grupo de resina bisacrílica pulido se obtuvo ΔE = 4,84 ± DS = 0,25 y, para el no pulido, ΔE = 5,85 ± DS = 0,29. Conclusiones: Se comprobaron diferencias significativas en la estabilidad del color de ambas resinas. La resina bisacrílica fue la menos estable, independientemente del pulido(AU)

Introduction: Provisional prosthesis are restorations used in fixed prostheses for a while, until the definitive prosthesis is cemented. One of the problems posed by this type of restoration is the change in color, which affects esthetics and therefore creates a feeling of displeasure in patients. Objective: Evaluate, in the case of provisional restorations with and without final surface polish, the color stability of two resins when soaked in coffee. Methods: An in vitro experimental study was conducted in the Prosthesis Laboratory at the Dental School of the National University of the Northeast in Corrientes, Argentina, in the year 2019. A comparison was made of an acrylic resin (Duralay®) versus a bisacrylic resin (ProtempIV 3M®) for provisional restorations. Forty resin disks were made from metal molds 2 mm thick and 25 mm in diameter. Twenty disks were used for each type of resin, of which 10 were polished and 10 were not. The samples were stored in distilled water in a stove at 37ºC for 24 h to hydrate them. Color measurements were then taken. Next, each group was soaked in coffee and kept in the stove at 37ºC for another 24 h. A second color measurement was then taken. A Konica Minolta® colorimeter was used to determine total color difference ΔE. Statistical analysis was based on one-way ANOVA and Tukey's test was used to identify the difference between the groups. Results: In the polished acrylic resin group a difference was found of ΔE = 0.82 ± SD = 0.22, whereas in the non-polish group the difference was ΔE = 3.86 ± SD = 0.30. In the polished bisacrylic resin group the difference was ΔE = 4.84 ± SD = 0.25, whereas in the non-polish group the difference was ΔE = 5.85 ± SD = 0.29. Conclusions: Significant differences were found in the color stability of both resins. The bisacrylic resin was the least stable, regardless of polish(AU)

The effect of different finishing and polishing procedures on the surface gloss of Bulk-Fill resin composites

STATEMENT OF THE PROBLEM: The literature still lacks evidence regarding which polishing techniques have the ideal clinical outcomes for bulk-fill resin composites. PURPOSE: This study evaluated the surface gloss of two commercially available bulk-fill resin composites after different polishing procedures and characterized their micromorphology via scanning electron microscopy. MATERIAL AND METHODS: 80 bulk-fill compactable composite resin discs were created. The control group was left untreated, and remaining samples were subjected to different polishing techniques. Gloss units were measured and surface morphology of disc samples was assessed. The Tukey post-hoc test was used to identify any differences. RESULTS: Statistically significant differences were found between the different polishing systems applied to Filtek BulkFill Posterior and Tetric N Bulk-Fill. No differences were found when the same polishing system was applied for both resins. The highest gloss values were obtained in the control group and the ENA Shiny system; the lowest were obtained with SofLex XT and Soflex Spiral Wheels for the bulk-fill composite resins studied. CONCLUSIONS. Diamond pastes have the highest gloss behavior, followed by diamond rubber points. The systems with aluminum oxide discs present the lower gloss behavior. SEM images provided useful evidence, and future studies should include an evaluation over time.

Efecto de Diferentes Técnicas de Acabado y Pulido Sobre la Rugosidad de un Composite de Nanoparticulas / Effect of Different Finishing and Polishing Techniques on the Roughness of a Nanoparticle Composite

El objetivo fue comparar la rugosidad de un composite nanoparticulado con diferentes técnicas de acabado y pulido. Se obtuvieron 20 discos en conformadores ad-hoc en los que se insertó un composite nanoparticulado en capas de 2mm. Se activó cada incremento durante 30s con una intensidad de 1450 mw/cm2. Todas las probetas se pulieron con la secuencia completa de discos Sof-lex a velocidad media y luego se asignaron a uno de 4 grupos (n=5) tratados de la siguiente manera: G1: sin tratamiento extra; G2: con cepillos Astrobrush y JC-SICRA-G; G3: con pasta de diamantes Diamond Gloss aplicada con fieltro; y pasta de óxido de aluminio Poligloss y fieltro; G4: igual que G3 + cepillos (igual que G2). Las superficies se evaluaron con un perfilómetro óptico tridimensional. Se registró la rugosidad promedio (Ra) en tres puntos de cada espécimen, se consideró la Ra a la media de los tres registros obtenidos. Los datos se analizaron mediante ANOVA de una vía y prueba de Tukey para comparaciones múltiples. Los resultados obtenidos fueron: G1: 132,20nm (26,16); G2: 77,20 nm (20,64); G3: 78,74 nm (10,04); G4: 66,47nm (31,08). Se encontró diferencia estadísticamente significativa entre los grupos (P=0.0017); de las comparaciones múltiples surge que G1 presentó una rugosidad media significativamente mayor que los restantes. G1>G2 (P<0.01), G1>G3 (P<0,05), G1>G4 (P<0,01). En conclusión, el uso de sistemas anexos de pulido permite lograr mayor lisura superficial. El uso de más de un sistema complementario no mejora el resultado (AU)

Influência do polimento e tipo de solução extrínseca na pigmentação de restaurações de resina composta / Influence of the dental polishing and type of extrinsic solution in the pigmentation of composite resin restorations

Objetivo: avaliar a pigmentação de restaurações de resina composta (RC) submetidas a diferentes métodos de polimento. Materiais e método: foram realizadas restaurações de RC classe V em 80 dentes bovinos, corpos de prova, divididos em dois grupos experimentais: G1, polimento com Ultra-Gloss, e G2, polimento com um sistema que utiliza uma ponta siliconada impregnada com abrasivo, Enhance. Após, todos os grupos experimentais foram submetidos a soluções pigmentantes de café, chimarrão e refrigerante, 2 vezes ao dia, por 5 minutos, num período de 15 dias. Os corpos de prova foram analisados pela coloração da RC através de um colorímetro utilizando o sistema CIE-Lab. Aplicou-se a análise de variância seguida do método de comparação múltipla de Tukey, quando observada diferença significativa entre os corpos de prova. Resultados: os resultados mostraram que houve diferença estatística nos valores de médios (valor-p < 0,05), sugerindo o café com variação mais elevada; também para as variações entre a condição experimental (valor-p < 0,05), com exceção de delta a (valor-p = 0,817). Conclusão: o tipo de método para polimento de restaurações em RC não apresenta associação significativa com a pigmentação do material, sendo que esta está relacionada com o tipo da solução corante e com o tempo de exposição do compósito às pigmentações. (AU)

Objective: to evaluate the pigmentation of composite resin restorations submitted to different polishing methods. Materials and method: Class V composite resin restorations were performed on 80 bovine teeth, specimens, and divided into two experimental groups: G1-polishing with Ultra-Gloss and G2-polishing with a system using a silicon tip impregnated with abrasive, Enhance. Afterwards, all the experimental groups were submitted to pigmenting solutions of coffee, chimarrão and refrigerante, 2 times a day, for 5 minutes, in a period of 15 days. The specimens were analyzed by coloring the composite resin using a colorimeter using the CIE-Lab system. The analysis of variance was applied followed by Tukey's multiple comparison method when a significant difference was observed between the test specimens. Results: The results showed that there was statistical difference in the mean values (p-value <0.05), suggesting coffee with the highest variation; (p-value <0.05), with the exception of delta a (p-value = 0.817). Conclusion: The type of method for polishing restorations in composite resin does not present a significant association with the pigmentation of the material, which is related to the type of the dye solution and the time of exposure of the composite to pigmentation. (AU)

Analysis of enamel and material wear by digital microscope: an in-vitro study

Abstract: The objective of the study was to analyze the surface area (SA) of the wear caused by simulated chewing on human enamel and opposing restorative material, namely: composite resin (CR), porcelain fused to metal (PFM), lithium disilicate (LD), or monolithic zirconia (MZr). Forty-eight premolars were selected as enamel specimens and divided randomly into 4 groups (n = 48; n =12) used as antagonists in chewing simulation (250,000 loading cycles) against one of the four selected test materials. Enamel and material specimens were scanned and evaluated under digital microscope, and wear SA (mm2) were recorded. Descriptive statistics, paired t-test, one-way ANOVA, and post-hoc Tukey-HSD tests were used for statistics (p < 0.05). The smallest and largest SA were exhibited by enamel against LD (0.80 mm2) and PFM (1.74 mm2), respectively. PFM (3.48 mm2) showed the largest SA and CR (2.28 mm2) showed the smallest SA. Paired t-test for SA values showed significant difference (p < 0.05) in all wear comparisons between materials and enamel antagonists. The wear of materials were greater than that of their respective enamel antagonists (p < 0.05). One-way ANOVA of the logarithmic means of wear SA revealed significant differences (P<0.05). Post-hoc Tukey test revealed significance for PFM (p < 0.05) with other materials. Wear of all test materials was greater compared to the wear of enamel antagonists. PFM and LD caused the largest and the smallest enamel wear, respectively. CR, LD, and MZr are more resistant than PFM to wear after simulated chewing against enamel.

Polishing of ground y-tzp ceramic is mandatory for improving the mechanical behavior

Abstract It evaluated the effect of aging by Low Temperature Degradation (LTD), executed after post- processing surface treatments (polishing, heat treatment and glazing), on the surface characteristics (micromorphology and roughness) and on the structural stability (phase transformation and mechanical behavior-flexural strength and structural reliability) of a ground yttrium-stabilized tetragonal zirconia polycrystal (Y-TZP) ceramic. Discs of Y-TZP (VITA In-Ceram YZ) were manufactured (ISO:6872-2015; 15 mm in diameter and 1.2 ± 0.2 mm in thickness) and randomly assigned into 10 groups according two factors: "aging" in 2 levels (with or without) and "surface treatment" in 5 levels (Ctrl: as-sintered; Gr: grinding with coarse diamond bur; Gr + HT: grinding plus heat treatment; Gr + Pol: grinding plus polishing; Gr + Gl: grinding plus glazing). Roughness (n=30), biaxial flexural test (n=30), phase transformation (n=2), and surface topography (n=2) analyses were performed. Aging led to an intense increase in monoclinic (m) phase content for all the tested conditions, being the as-sintered samples (Ctrl= 65.6%) more susceptible to the t-m phase transformation. Despite of increasing the m-phase content, aging was not detrimental for characteristic strength (except to the grinding condition). There was no significant reduction in the Weibull modulus after surface treatments. Additionally, heat treatment and glazing after grinding led to a decrease in characteristic strength, while polishing presented the highest characteristic strength values. Thus, polishing is mandatory after grinding the Y-TZP ceramic, while performing glazing or heat-treatment alone after grinding lead to the worst mechanical performance.

Resumo Este estudo avaliou o efeito do envelhecimento através da degradação a baixas temperaturas (low temperaturare degradation - LTD) após a realização de tratamentos de superfície pós- sinterização (polimento, tratamento térmico e glaze) nas características superficiais (micromorfologia e rugosidade), e na estabilidade estrutural (transformação de fase e comportamento mecânico - resistência flexural e confiabilidade estrutural) de uma cerâmica de zircônia tetragonal policristalina estabilizada por ítria (Y-TZP) desgastada. Discos de cerâmica Y-TZP (VITA In-Ceram YZ) foram confeccionados (ISO:6872-2015; 15mm de diâmetro e 1,2 ± 0,2mm de espessura) e randomicamente divididos em 10 grupos de acordo com dois fatores: "envelhecimento" (com e sem) e "tratamento de superfície" (Ctrl - sem tratamento; Gr - desgaste com ponta diamantada grossa; Gr + HT - desgaste mais tratamento térmico; Gr + Pol - desgaste mais polimento; Gr + Gl - desgaste mais glazeamento). Foram realizadas as análises de rugosidade (n=30), flexão biaxial (n=30), transformação de fase (n=2) e topografia de superfície (n=2). O envelhecimento levou a um aumento intenso no conteúdo de fase monoclínica (m) em todas as condições testadas, sendo observada uma maior susceptibilidade de transformação de fase t-m nas amostras do grupo controle (Ctrl= 65.6%). Apesar de provocar elevada transformação de fase, o envelhecimento não apresentou efeitos negativos nos desfechos avaliados. Não houve redução significativa do módulo de Weibull após os tratamentos. Além disso, o tratamento térmico e o glaze após desgaste levaram a uma redução da resistência característica, enquanto que o grupo polimento apresentou o mais alto valor de resistência característica. O glaze e o tratamento térmico geraram o pior desempenho mecânico, portanto a realização do polimento após desgaste de uma cerâmica Y-TZP é obrigatória.

Using UV light for adhesive remnant removal after debonding of orthodontic accessories

Abstract The objective of this study was to assess the effect of a UV light-based auxiliary illumination on adhesive remnant (AR) removal after orthodontic debonding. Sixty human molars were divided according to the adhesive used for bonding: O-opaque; LF-low fluorescence; and HF-high fluorescence. After debonding, the teeth were subdivided according to the AR removal method: No UV light or With UV light. After AR removal, the teeth were polished. Direct visual analysis, scanning electron microscopy (SEM) and time quantification for AR removal analyses were performed (Fisher-Freeman-Halton, Fisher's exact, chi-square trend, ANOVA, and independent t-tests; α = 5%). Concerning the adhesives, there was no significant difference among direct visual, SEM and time analyses for AR removal (p ≥ 0.05). Regarding AR removal methods, a similarity among the subgroups was verified for direct visual and SEM analyses (p≥0.05). However, a significant trend was verified for the with UV light method to produce greater marks, and the no UV light method, to produce a greater rate of samples with AR before polishing (p = 0.015). AR removal with light was significantly quicker in comparison with the no UV light method (p < 0.0001). The use of UV light may aid orthodontists in removing AR more thoroughly and in less time. However, they should receive special training to apply this technology, and should never dismiss the final polishing procedure.

Evaluation of Surface Roughness of Monolithic Zirconia after Using Different Polishing Kits

Objective: To evaluate the effect of different kits to polish monolithic zirconia on its surface roughness. Material and Methods: Five samples were fabricated using zirconia blocks. Each sintered block was divided into four areas of equal size and each area was subjected to a specific surface treatment according to the four groups of the study: GC: no surface treatment, GG: unidirectional grinding with high speed tapered bur under refrigeration, GP1: wear similar to GG followed by polishing with zirconia polishing kit Kenda at the same wear direction, and GP2: wear similar to GG followed by polishing with zirconia polishing kit Diacera at the same wear direction. Qualitative and quantitative analyses of ceramic topography and roughness were performed using a digital optical profilometer, and Roughness measurements were performed using two parameters (Ra and Rz: arithmetical mean of the absolute values of the surface departures and of the five highest peaks and valleys, respectively). Scanning electron micrographs of each ceramic surface were obtained to illustrate sample roughness. The means of each group were analyzed by 1-way ANOVA followed by Tukey's test. Results: Morphological analysis showed that polishing kits provided the same pattern of a smooth surface. To statistical analysis, this study showed that different polishing kits influenced zirconia roughness for both Ra and Rz after surface wear (p < 0.05) with both situations improved the surface roughness observed immediately after zirconia sintering. Conclusion: According to the results, both polish kits resulted in a surface texture within acceptable clinical parameters.

Translucency and color stability of resin composite and dental adhesives as modeling liquids - A one-year evaluation

Abstract The aim of this study is to evaluate the influence of modeling liquids on the translucency and color shade of resin composites (RCs) after one year of storage. RC specimens were prepared using either a conventional insertion technique (control; without modeling liquid) or a restorative dental modeling insertion technique (RDMIT) with dental adhesives as modeling liquids (Scotchbond™ Multi-Purpose [SBMP; 3M ESPE] or Adper™ Single Bond 2 [SB; 3M ESPE]). The initial colors of the specimens were obtained with a digital spectrophotometer and the CIEL*a*b* color system, after which specimens were stored (37°C) in distilled water or red wine for 12 months. Color measurements were reassessed after 6 and 12 months of storage, and scanning electron microscopy was performed after 12 months. Translucency and color change (ΔE*) were calculated and analyzed using ANOVA and Tukey's test (α = 5%). RC samples prepared via RDMIT showed a translucency similar to that of control samples. ΔE* was also less intense for RCs containing SBMP than for RCs containing SB. Specimens stored in wine showed a clear pattern of degradation, especially in the control group, and surface degradation seemed to be less intense for specimens prepared with SBMP and SB than for specimens without. Specimens stored in water did not show clear evidence of surface degradation. RDMIT appears to be an interesting approach to reduce ΔE* in RCs over time without negative effects on the translucency of the material. However, the modeling liquid should feature a hydrophobic composition, similar to that used in the SBMP group, the achieve the best results.

Determinación de la calidad de pulido de resinas de nanorrelleno empleando un microscopio de fuerza atómica / Determining the polishing quality of nanofilled resins using an atomic force microscope

Introducción: Los procedimientos de acabado y pulido de las restauraciones dentarias son fases determinantes en la práctica odontológica,ya que las superficies bien acabadas y pulidas aumentan la longevidadde la restauración, disminuyen la acumulación de placa y reducen las modificaciones del color marginal a la restauración y superficie. Objetivo: El propósito de este estudio fue evaluar tres diferentes sistemas de pulido: discos Sof-Lex, copas pulidoras Jiff y y sistema de un solopaso OptraPol, en función de la superficie obtenida en tres marcas deresinas estéticas nanohíbridas para zona anterior y posterior...

Introduction: The procedures for finishing and polishing dental restorations are crucial phases in dental practice, as well-fi nished andwell-polished surfaces increase the longevity of the restoration andreduce the buildup of plaque and marginal color changes in both therestoration and the surface. Objective: The purpose of this study wasto evaluate three diff erent polishing systems: Sof-Lex™, Jiff y® polishercups, and the OptraPol one-step system, based on the surface obtainedusing three brands of cosmetic nanohybrid resins in the anterior and posterior regions...

Effects of modeling liquid/resin and polishing on the color change of resin composite

Abstract Modeling liquids/resins have been used to build up resin composite (RC) restorations, although there is a lack of information regarding their effects on the color stability of the latter. Therefore, the purpose of the present study was to evaluate the effects of the presence of modeling liquid between layers of RC and the finishing/polishing state of the material on color change in specimens exposed to red wine staining over time. Specimens were prepared by placing four increments (±0.5 mm thick) of RC (Filtek™ Z350 XT, 3M ESPE) into molds; half of which were prepared by applying modeling liquid (Scotchbond™ Multi-Purpose™ Adhesive, SBMP, 3M ESPE) between the layers of RC, whereas the other half were prepared without SBMP (control). Light-activation was performed after application of the final RC layer using a light-emitting diode (Radii, SDI) curing unit with an irradiance of 900 mW/cm2 for 20 s. Each group was divided according to the surface finishing protocol (n = 7): nothing (non-polished) or polishing with Sof-Lex™/diamond paste (polished). Initial colors of the specimens were evaluated with a digital spectrophotometer and the CIEL*a*b* color system. The specimens were stored in wine (37°C) for 12 months, and the color measurements were reassessed after 4, 6, and 12 months of storage. Scanning electron microscopy (SEM) analysis was performed at the end. Data were analyzed using ANOVA and Tukey's test (α = 5%). The presence of SBMP resulted in lower overall color change of the RC as compared with the control. The non-polished specimens exhibited a significantly higher color change than the polished specimens. SEM images corroborated the previous findings. In summary, the use of modeling liquid between layers of RC shows potential for application to reduce or delay the staining process of RC over time. Moreover, polishing is essential to provide increased color stability of the RC restoration.

The effect of standardised implantoplasty protocol on titanium surface roughness: an in-vitro study

Abstract: To analyse the changes of surface characteristics of machined and moderately roughened titanium disks following a standardised implantoplasty protocol. Forty titanium discs (machined: n = 20; moderately roughened: n = 20) were instrumented with one half of each disc maintained as the control (non-instrumented). The standardised implantoplasty protocol was carried out using a custom jig with the sequential change of burs: 1) Regular grit diamond [10s], 2) Super-fine grit diamond [10s], 3) Brownie(tm) silicone polisher [15s], 4) Greenie(tm) silicone polisher [15s]. Surface topography was analysed using confocal laser scanning microscopy (CLSM) and scanning electron microscopy (SEM). Energy dispersive x-ray spectroscopy (EDS) was used to measure the elemental profiles of each disc. Quantitative analysis showed similar changes in level of roughness between the machined and moderately roughened titanium discs. CLSM demonstrated an increased roughness (Ra and Sa values) after polishing with a regular grit diamond bur when compared to the uninstrumented surfaces. Although the roughness decreased after the further polishing with the super-fine grit diamond bur, subsequent instrumentation using silicon burs tended to increase the roughness, albeit being statistically insignificant. There was a residue of silicon particles despite the irrigation after each polishing stage. The proposed implantoplasty protocol did not achieve a sufficient level of smoothness on the machined or moderately roughened titanium surfaces when compared to the Ra threshold. Further research is recommended to test the efficacy of each bur on titanium surfaces with longer duration using actual oral implants to allow better comparison.

Effect of polishing and brushing on removal of cigarette smoke stains from artificial teeth / Efecto del pulido y cepillado en la eliminación de manchas de humo de cigarrillo en dientes artificiales

Color alteration is still a disadvantage of acrylic resin teeth and this problem seems to be greater in smokers. The objective of this study was to evaluate the efficiency of polishing and brushing on removal of stains from artificial teeth submitted to cigarette smoke. Forty denture teeth of distinct shades (62 and 69) were selected. The teeth were divided into 4 groups (n= 10), according to the tooth shade and method of stain removal performed: Groups 1 and 2 were submitted to the smoke of 20 cigarettes, and after new color readouts, were submitted to polishing with pumice stone and Spanish white paste. Groups 3 and 4 were submitted to 4 cycles of 5 cigarettes interspersed with standardized manual brushing. The values of color stability (DE) were compared using 2-way ANOVA, Bonferroni test (p<0.05). For all the groups, color change occurred at clinically unacceptable levels (E>3.3). After exposure to 20 cigarettes, the greatest degree of color change occurred for teeth in shade 62. Polishing significantly reduced the color change for groups 1 and 2, however, without significant difference between them. For Groups 3 and 4 there was no difference between the teeth of shade 62 and 69. When the treatments for each tooth shade were compared alone, there was similarity between polishing and brushing irrespective of the shade of samples. Routine manual brushing and common clinical polishing methods were capable of removing a large portion of staining caused by cigarettes, and there was no difference between the methods.

La alteración del color sigue siendo una desventaja de los dientes de resina acrílica y este problema parece ser mayor en los fumadores. El objetivo de este estudio fue evaluar la eficacia de pulido y cepillado en la eliminación de manchas de los dientes artificiales presentados al humo del cigarrillo. Se seleccionaron cuarenta dientes de la dentadura de tonos diferentes (62 y 69). Los dientes fueron agrupados en 4 grupos (n= 10), de acuerdo con el color del diente y el método de eliminación de manchas realizado: Los grupos 1 y 2 fueron sometidos al humo de 20 cigarrillos, y después de nuevas lecturas de color, se pulieron con piedra pómez piedra y pasta blanca española. Los grupos 3 y 4 se sometieron a 4 ciclos de 5 cigarrillos intercalados con cepillado manual estandarizado. Los valores de estabilidad del color (Delta E) se compararon mediante las pruebas de ANOVA de dos vías y Bonferroni (p<0,05). Para todos los grupos, el cambio de color se produjo a niveles no aceptables clínicamente (DE>3,3). Después de la exposición a 20 cigarrillos, el mayor grado de cambio de color se produjo para los dientes de tono 62. El pulido redujo significativamente el cambio de color para los Grupos 1 y 2, sin diferencia significativa entre ellos. Para los Grupos 3 y 4 no hubo diferencia entre los dientes de tono 62 y 69. Cuando los tratamientos para cada color de diente se compararon individualmente, hubo similitud entre el pulido y el cepillado, independientemente del tono. El cepillado manual rutinario y los métodos comunes de pulido clínicos fueron capaces de eliminar una gran parte de manchas causadas por los cigarrillos, sin diferencia entre los métodos.

Avaliação da rugosidade superficial de diferentes resinas compostas após a realização do acabamento e polimento / Evaluation of the surface roughness of different composites after finishing and polishing

A grande aplicabilidade clínica e a difusão do uso da resina composta geraram uma série de questionamentos sobre as características e o comportamento deste material. Dentre estes, a impossibilidade de formar uma superfície perfeitamente lisa devido aos fatores como o tamanho das partículas e a necessidade de ajustes após a confecção da restauração. Com o intuito de reduzir a rugosidade superficial, diferentes métodos de acabamento e polimento têm sido propostos. Avaliou-se a rugosidade superficial de dois diferentes tipos de resina composta, microparticulada e nanoparticulada, após a realização do acabamento e polimento final. Para isto, foram utilizadas a resina composta microparticulada Durafill VS (Heraeus-Kulzer) e as resinas nanoparticuladas Filtek Z350 XT (3M-ESPE®), Opallis (FGM®) e IPS Empress Direct (Ivoclar Vivadent®). Com essas, foram confeccionados 14 corpos de prova de cada resina composta, submetidos aos mesmos procedimentos de acabamento e polimento, seguindo as seguintes etapas: desgaste com ponta diamantada 2135 F (KG Sorensen®), polimento com a sequência de borrachas abrasivas (Ivoclar Vivadent®) e discos de feltro com pasta diamantada. Cada espécime foi submetida à leitura em rugosímetro para determinação da rugosidade superficial. Os dados obtidos foram submetidos à análise de variância (ANOVA) e teste de Tukey, com nível de significância de 5%. Não houve diferença significativa entre as rugosidades superficiais dos materiais restauradores testados e o sistema de polimento utilizado foi eficaz no aumento da lisura superficial.

The large clinical applicability and propagation of the use of composites have raised many questions about the characteristics and behavior of these materials. Among them is the impossibility of obtaining a perfectly smooth surface, due to factors such as particle size and adjustments required after the restoration is complete. In order to reduce the surface rough-ness, different finishing and polishing methods have been proposed. It was evaluated the surface roughness of two different kinds of composites, microparticle and nanoparticle, after finishing and polishing procedures. For this, we used the microfilled composite, Durafill VS (Heraeus-Kulzer) and nanoparticle composites, Filtek Z350 XT (3M-ESPE), Opallis (FGM), and IPS Empress Direct (Ivoclar Vivadent). Fourteen specimens were fabricated of each composite, and submitted to the same finishing and polishing procedures by following these steps: wear with a Diamond point 2135 F (KG Sorensen), polished with abrasive silicone rubber points sequence (Ivoclar Vivadent), and felt wheels with diamond paste. Each sample was submit¬ted to superficial roughness evaluation using a rugosimeter. Data were submitted to ANOVA statistical analysis and Tukey test at a level of significance of 5%. There were no significant statistically differences between the surface roughness of the tested restorative materials and the polishing system used was effective in increasing surface smoothness.

In vitro cytotoxicity of self-curing acrylic resins of different colors

OBJECTIVE: The aim of this study was to assess the in vitro cytotoxicity of acrylic resins of different colors over time. METHODS: Specimens were divided into 4 groups (n = 6) according to the color of the acrylic resin (Orto Class, Clássico, Campinas, São Paulo, Brazil): Group 1: clear acrylic resin; group 2: pink acrylic resin; group 3: blue acrylic resin and group 4: green acrylic resin. All specimens were fabricated according to the mass manipulation technique and submitted to mechanical polishing protocol. The control was performed with an amalgam specimen (C+), a glass specimen (C-) and cell control (CC). Specimens were immersed in Minimum Eagle's Medium (MEM) and incubated for 24 h at 37o C. The extracts from the experimental material were filtered and mixed with L929 fibroblast. Cytotoxicity was evaluated at 4 different times, 24, 48, 72 and 168 h. After contact, cells were incubated for 24 h and added to 100 µ of 0.01% neutral red dye. The cells were incubated for 3 h for pigment incorporation and fixed. Cells viability was determined by a spectroscopic (BioTek, Winooski, Vermont, USA) with a 492-nm wavelength λ=492 nm). RESULTS: There were no statistical differences between the experimental groups and the CC and C- groups. CONCLUSION: Clear, pink, blue and green self-curing acrylic resins fabricated by means of the mass manipulation technique and mechanically polished are not cytotoxic. Neither the pigment added to the self-curing acrylic resin nor the factor of time influenced the cytotoxicity of the material. .

OBJETIVO: avaliar, in vitro, a citotoxicidade de resinas acrílicas autopolimerizáveis, de diferentes cores, ao longo do tempo. MÉTODOS: os corpos de prova foram divididos em quatro grupos (n = 3), de acordo com a cor da resina acrílica utilizada (Orto Class, Clássico, São Paulo/SP), sendo: grupo 1, acrílica incolor; grupo 2, acrílica rosa; grupo 3, acrílica azul; e, grupo 4, acrílico verde. Todos os corpos de prova foram confeccionados pela técnica de massa e polidos mecanicamente. Um corpo de prova de amálgama, um de vidro e célula constituíram o controle positivo (C+), controle negativo (C-), e controle de célula (CC), respectivamente. Em seguida, esses foram imersos em meio mínimo essencial de Eagle (MEM) por 24h, quando se removeu o sobrenadante e colocou-os em contato com fibroblastos L929. Avaliou-se a citotoxicidade em quatro períodos: 24, 48, 72 e 168h. Após o contato com o meio, as células foram incubadas por 24h e adicionou-se 100µ do corante vermelho neutro a 0,01%. Posteriormente, as células foram incubadas por 3h, para incorporação do corante, e fixadas. A contagem das células viáveis foi realizada em espectrofotômetro (BioTek, Winooski, EUA), com um comprimento de onda de 492nm (λ = 492nm). RESULTADOS: não houve diferença estatística entre os grupos experimentais e os grupos CC e C-. CONCLUSÇÕES: as resinas acrílicas autopolimerizáveis incolor, rosa, azul e verde, manipuladas pela técnica de massa e polidas mecanicamente não são citotóxicas. O corante utilizado em resinas autopolimerizáveis e tempo não influenciam na citotoxocidade do material. .

Técnica para remoção do remanescente adesivo após descolagem de braquetes ortodônticos / Technique for removal of remmant adhesive after debonding od orthodontic brackets

A etapa de remoção de aparelhos ortodônticos deve ser realizada tentando preservar, ao máximo, a estrutura dentária. Apesar de existirem vários protocolos e materiais disponíveis no mercado, alguns profissionais desconhecem os efeitos destes materiais na superfície do esmalte, o que pode contribuir para que o esmalte seja permanentemente danificado, ou desconhecem que, quando a resina não for adequadamente removida, pode ocorrer um aumento na agregação de biofilme, tornando o esmalte mais suscetível a doenças cárie e periodontal. / Objetivo / O objetivo desse trabalho foi demonstrar, por meio de um caso clínico, uma sequência de acabamento e polimento pós-terapia ortodôntica. / Métodos / Após a remoção dos braquetes, a resina residual foi evidenciada com pó dourado (Texturmarker, Benzer Dental AG, Suíça). Em seguida, foi utilizada broca multilaminada (Komet), discos Sof-Lex (3M ESPE), borrachas para acabamento Astropol e Astrobrush (Ivoclar Vivadent), escova de pelo de cabra e FlexiBuff com pasta Enamelize (Cosmedent). / Conclusão / Pôde-se concluir que a sequência de materiais utilizados foi efetiva e de fácil execução, preservando a estrutura dentária.

Lisura superficial de resinas compostas com nanopartículas após protocolos de acabamento e polimento / Smooth surface of nanoparticle composites after finishing and polishing protocols

O objetivo desse estudo foi avaliar a lisura de superfície de três resinas compostas por nanopartículas, após serem submetidas a três diferentes sistemas de acabamento e polimento. Foram obtidos 40 corpos de prova de cada resina (Filtek Z350 XT, Premise e Charisma Diamond) e distribuídos em quatro grupos experimentais (n=10): C (controle) - sem tratamento; SOF -Discos abrasivos Soflex; ENH - Pontas siliconadas Enhance e F/FF - Pontas diamantadas de granulação fina/extra-fina + disco de feltro e pasta diamantada. Após 24h da confecção e armazenamento, os sistemas de acabamento e polimento foram aplicados. A lisura superficial foi avaliada utilizando-se um rugosímetro, tendo sido realizadas cinco leituras em cada corpo de prova. A média dos valores de rugosidade de superfície [um] obtidos foi analisada através da ANOVA, dois fatores, seguido do teste de Tukey, com significância de 1%. Para todas as resinas testadas, houve diferença estatística entre os sistemas de acabamento e polimento testados (p<0,01). Para a resina Charisma, os valores de rugosidade foram: C - 0,10a; SOF - 0,24b; ENH - 0,23b; F/ FF - 0,32c. Para a Premisa: C-0,12a; SOF - 0,16ab; ENH - 0,22b; F/FF - 0,30<. Para a Filtek: C - 0,08'; SOF - 0,14ab; ENH - 0,20b<; F/FF - 0,26<. No grupo controle foram obtidos os melhores resultados de lisura de superfície para todas as resinas testadas. Em relação aos tratamentos, os grupos SOF e ENH promoveram as melhores lisuras de superfície, enquanto que o grupo F/FF resultou em superfícies com maiores rugosidades.

The aim of this study was to evaluate the smoothness surface of 3 composites by nanoparticles (Filtek Z350 XT, Premise e Charisma Diarnond], after being subjected to three different finishing and polishing systems. Were obtained 40 specimens of each resin selected and randomly divided into 4 experimental groups (n= 10): C (control) - no treatment; SOF - Abrasive discs Soflex; ENH - silicon tips Enhance; and F / FF - diamond tips fine/extra-fine granulation + felt disc and diamond paste. Twenty-four hours after the preparation and storage of the specimens in distilled water at 37°(, the finishing and polishing systems were applied. The smooth surface of the composites was evaluated using a rugosimeter, where five readings were taken on each specimen. The mean surface roughness (um) were analyzed by ANOVA, two factors, followed by Tukev's test, with significance of 1%. For ali resins tested, statistical difference was found between finishing and polishing systems tested (p<0,01). To the resin Charisma roughness values were: C - 0,10a; SOF - 0,24b; ENH - 0,23b; F/ FF - 0,32c. For the premise : C-0,12a; SOF - 0,16ab; ENH - 0,22b; F/FF - 0,30<. Para a Filtek: C - 0,08'; SOF - 0,14ab; ENH - 0,20b<; F/FF - 0,26<. The control group obtained better results of surface smoothness for ali composites tested. Regarding the treatments groups, SOF and ENH resulted on better smoothness surface, while the group FI FF resulted in surfaces with higher roughness.